Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014.  

www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved. 

6

Cisco TelePresence MX700 and MX800 

Administrator Guide

What’s new  in this version

This section provides an overview of the new and changed 

system settings and new features in the TC7.2 software 

version.

Software release notes

For a complete overview of new features and changes, we 

recommend reading the Software Release Notes (TC7). Go 

to:

Software download

For software download go to: 

New features and improvements

Support for Touch 10 network pairing
Network pairing of the Touch 10 user interface is supported. 

Web snapshots can be enabled remotely from the web 

interface
Web snapshots can be enabled remotely from the web 

interface. In previous versions web snapshots had to be 

enabled locally on the endpoint.

Improved fail-over support for endpoints registered 

through Collaboration Edge
CUCM: If the CUCM is down, the endpoint will automatically 

re-register to another CUCM. 

VCS Control and VCS Expressway: If the VCS Control or 

VCS Expressway goes down, the endpoint will automatically 

re-register to another VCS Control / VCS Expressway. Call 

preservation is not supported. 

Provisioning (HTTPS): If the provisioning service goes down, 

the endpoint will receive provisioning data from another 

provisioning service. 

Phone book: If the phone book service goes down, the 

endpoint will automatically use another phone book service. 

More parameters can be provisioned from CUCM
The following configuration parameters can now be 

provisioned from CUCM under vendor specific configuration:

•  SystemUnit Name
•  Video OSD TodaysBookings
•  Standby StandbyAction
•  Audio DefaultVolume
•  Conference 1 MaxTotalReceiveCallRate
•  Conference 1 MaxTotalTransmitCallRate

Touch user interface and on-screen display (OSD) 

screenshots can be captured from the web interface
A new web feature has been implemented to be able to 

capture screenshots of the OSD and the touch panel. This 

feature is available even if web snapshots are disabled.

The Video Output status provides information about the 

connected display
In order to identify the connected display model and its 

preferred resolution the Video Output status will now print the 

following values: 

•  Video Output Connector n Connected
•  Video Output Connector n ConnectedDevice Name
•  Video Output Connector n ConnectedDevice 

PreferredFormat

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Introduction