Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D15119.01 MX700 and MX800 Administrator Guide TC7.1.2, JUNE 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
103
Cisco TelePresence MX700 and MX800
Administrator Guide
Video settings
Video AllowWebSnapshots
Allow or disallow snapshots being taken of the local input sources, remote sites and
presentation channel. If allowed, the web interface Call Control page will show snapshots both
when idle and in a call.
NOTE: This feature is disabled by default, and must be enabled from the directly connected
NOTE: This feature is disabled by default, and must be enabled from the directly connected
Touch controller, or via the codec's serial port (COM port).
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: Capturing web snapshots is not allowed.
On: Web snapshots can be captured and displayed on the web interface.
On: Web snapshots can be captured and displayed on the web interface.
Example:
Video AllowWebSnapshots: Off
Video CamCtrlPip CallSetup Mode
This setting is used to switch on self-view for a short while when setting up a call. The Video
CamCtrlPip CallSetup Duration setting determines for how long it remains on. This applies when
self-view in general is switched off.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: self-view is not shown automatically during call setup.
On: self-view is shown automatically during call setup.
On: self-view is shown automatically during call setup.
Example:
Video CamCtrlPip CallSetup Mode: On
Video CamCtrlPip CallSetup Duration
This setting only has an effect when the Video CamCtrlPip CallSetup Mode setting is switched
On. In this case, the number of seconds set here determines for how long self-view is shown
before it is automatically switched off.
Requires user role: ADMIN
Value space: <1..60>
Value space: <1..60>
Range: Choose for how long self-view remains on. The valid range is between 1 and 60
seconds.
Example:
Video CamCtrlPip CallSetup Duration: 10
Video DefaultPresentationSource
Not applicable for this product.
Video Input Connector [1..5] Name
Enter a name for the video input connector.
Requires user role: ADMIN
Value space: <S: 0, 50>
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example:
Video Input Connector 1 Name: "Camera 1"Video Input Connector 1 Name: ""
Video Input Connector [1..5] InputSourceType
Select which type of input source is connected to the video input.
Requires user role: ADMIN
Value space: <other/camera/PC/DVD/document_camera>
Value space: <other/camera/PC/DVD/document_camera>
Other: When none of the below options do match, set to Other.
Camera: Select Camera when you have a camera connected to the video input.
PC: Select PC when you have a PC connected to the video input.
DVD: Select DVD when you have a DVD player connected to the video input.
Document_Camera: Select Document_Camera when you have a document camera
Camera: Select Camera when you have a camera connected to the video input.
PC: Select PC when you have a PC connected to the video input.
DVD: Select DVD when you have a DVD player connected to the video input.
Document_Camera: Select Document_Camera when you have a document camera
connected to the video input.
Example:
Video Input Connector 2 InputSourceType: Camera
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings