Manualsbrain.com
  1. Manuali
  2. Marche
  3. Cisco
  4. Cisco TelePresence MX700
  5. Manuale Di Manutenzione

Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

Scarica
Pagina di 124
D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.  
www.cisco.com — Copyright © 2011–2014 Cisco Systems, Inc. All rights reserved. 
109
Cisco TelePresence MX200 and MX300  
Administrator Guide
Video OSD EncryptionIndicator
Define for how long the encryption indicator (a padlock) will be shown on screen. The setting 
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure 
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted 
calls is a crossed out locked padlock.
Requires user role: ADMIN
Value space: <Auto/AlwaysOn/AlwaysOff>
Auto: If the Conference Encryption Mode setting is set to BestEffort and the call is 
encrypted, the encryption indicator is shown during the first seconds of a call. If the 
Conference Encryption Mode setting is set to BestEffort and the call is non-encrypted, the 
crossed out encryption indicator is shown during the entire call. If the Conference Encryption 
Mode setting is NOT set to BestEffort, the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies 
to both encrypted and non-encrypted calls for all Conference Encryption Mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both 
encrypted and non-encrypted calls for all Conference Encryption Mode settings.
Example:
 Video OSD EncryptionIndicator: Auto
Video OSD MissedCallsNotification
This setting is not applicable for this product.
Video OSD AutoSelectPresentationSource
This setting is not applicable for this product.
Video OSD CallSettingsSelection
This setting is not applicable for this product.
Video OSD TodaysBookings
This setting is not applicable for this product.
Video OSD MyContactsExpanded
This setting is not applicable for this product.
Video OSD Output
This setting is not applicable for this product.
Video OSD InputMethod InputLanguage
This setting is not applicable for this product.
Video OSD InputMethod Cyrillic
This setting is not applicable for this product.
Video OSD LoginRequired
This setting is not applicable for this product.
Video Output LCD [1] Resolution
Set the resolution and refresh rate for the video system's LCD screen.
Requires user role: ADMIN
Value space: <1920_1080_60>
1920_1080_60: The screen resolution is 1920 x 1080, and the refresh rate is 60 Hz.
Example:
 Video Output LCD 1 Resolution: 1920 _ 1080 _ 60
Video Output LCD [1] MonitorRole
Set the LCD monitor role. Do not change this setting manually; keep the default setting.
Value space: <InternalSetup>
InternalSetup: The internal setup as defined by the Touch controller will be used.
Video Output LCD [1] Brightness
Set the brightness level for the monitor.
Requires user role: ADMIN
Value space: <0..100>
Range: Select a value from 0 to 100.
Example:
 Video Output LCD 1 Brightness: 50
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
System settings