Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.13 MX200 and MX300 Administrator Guide TC7.3, OCTOBER 2015.

Cisco TelePresence MX200 and MX300

Administrator Guide

Audio settings

Audio InternalSpeaker Mode

Set the internal loudspeaker mode.

Requires user role: ADMIN
Value space: <Off/On>

Off: The internal speakers are disabled.
On: The internal speakers are enabled.

Example:

Audio InternalSpeaker Mode: On

Audio Microphones Mute Enabled

Determine whether audio-mute is allowed or not. The default value is True.

Requires user role: ADMIN
Value space: <True/InCallOnly>

True: Muting of audio is always available.
InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not

possible to mute the microphone. This is useful when an external telephone service/audio

system is connected via the codec and is to be available when the codec is not in a call.

When set to InCallOnly this will prevent the audio-system from being muted by mistake.

Example:

Audio Microphones Mute Enabled: True

Audio SoundsAndAlerts KeyTones Mode

The system can be configured to make a keyboard click sound effect (key tone) when typing

text or numbers on the Touch controller.

Requires user role: USER
Value space: <Off/On>

Off: No key tones will be played when you type.
On: You will hear key tones when you type.

Example:

Audio SoundsAndAlerts KeyTones Mode: Off

Audio SoundsAndAlerts RingTone

This setting defines which ringtone to use for incoming calls. You need to enter the exact name

of the ringtone. You can find the available ringtones the following ways.
Web interface: On the Configuration > Personalization page.
Touch controller: On the Ringtone & Sound panel of the Settings menu. This panel is either

in the open part of the Settings menu, or included in the password protected Administrator

menu. The UserInterface UserPreference setting defines which panels will be in the password

protected area.

Requires user role: USER
Value space: <S: 1, 100>

Format: String with a maximum of 100 characters.

Example:

Audio SoundsAndAlerts RingTone: "Sunrise"

Audio SoundsAndAlerts RingVolume

Sets the ring volume for an incoming call.

Requires user role: USER
Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.

Example:

Audio SoundsAndAlerts RingVolume: 50

Audio DefaultVolume

Set the default speaker volume. The volume returns to this value when you switch on or restart

the video system. Use the Touch controller to change the volume while the video system is

running.

Requires user role: USER
Value space: <0..100>

Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the

range from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched

off.

Example:

Audio DefaultVolume: 50

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings