Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D14850.08 MX200 and MX300 Administrator Guide TC7.0, DECEMBER 2013.
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
110
Cisco TelePresence MX200 and MX300
Administrator Guide
Factory resetting the Touch 8
control panel
You can reset the Touch 8 control panel to its default factory
settings using the New message indicator and the Mute
button.
When factory resetting Touch 8 the logs are cleared, and the
configuration and pairing information are lost.
Touch 8 restarts after the reset and receives a new
configuration automatically from the video system.
It is not possible to undo a factory reset.
1. Locate the
New message indicator
and
Mute
buttons.
The
New message indicator
is a bit hard to see, but it is
the button with the exclamation mark on it.
2. Press and hold the
New message indicator
until it lights
up (approximately 10 seconds).
3. Press the
Mute
button twice.
The Touch controller automatically reverts to the default
factory settings and restarts.
Mute button
New
message
indicator
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
Appendices