Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

Pagina di 115
D14850.08 MX200 and MX300 Administrator Guide TC7.0, DECEMBER 2013.  
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 
39
Cisco TelePresence MX200 and MX300  
Administrator Guide
Navigate to: Configuration > Security: Strong Security Mode tab
Setting strong security mode
Strong security mode should be used only when compliance 
with DoD JITC regulations is required. 
Read the provided information carefully before setting 
strong security mode.
Strong security mode sets very strict password requirements, 
and requires all users to change their password on the next 
sign in. 
Software upload from TMS, web snapshots and calling from 
the web interface are prohibited in strong security mode.
Setting strong security mode
Read carefully about the consequences of 
strong security mode before you continue.
1.  If you want to use strong security mode, 
click 
Enable strong security mode
Confirm your choice in the dialog box that 
appears.
The system will restart automatically. 
2.  Change the password when you are 
prompted. The new password must meet 
the strict criteria as described. 
How to change the system password is 
described in the 
section.
Return to normal mode
1.  When in strong security mode, the system 
can be restored to normal mode by 
clicking 
Disable strong security mode...
.
2.  The system will restart automatically.
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
Web interface