Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.08 MX200 and MX300 Administrator Guide TC7.0, DECEMBER 2013.  

www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 

53

Cisco TelePresence MX200 and MX300  

Administrator Guide

Audio settings

Audio InternalSpeaker Mode

Set the internal loudspeaker mode.

Requires user role: ADMIN
Value space: <Off/On>

Off: The internal speakers are disabled.
On: The internal speakers are enabled.

Example:

 Audio InternalSpeaker Mode: On

Audio Microphones Mute Enabled

Determine whether audio-mute is allowed or not. The default value is True.

Requires user role: ADMIN
Value space: <True/InCallOnly>

True: Muting of audio is always available.
InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not 

possible to mute the microphone. This is useful when an external telephone service/audio 

system is connected via the codec and is to be available when the codec is not in a call. 

When set to InCallOnly this will prevent the audio-system from being muted by mistake.

Example:

 Audio Microphones Mute Enabled: True

Audio SoundsAndAlerts KeyTones Mode

The system can be configured to make a keyboard click sound effect (key tone) when typing 

text or numbers on the Touch screen control panel.

Requires user role: USER
Value space: <Off/On>

Off: No key tones will be played when you type.
On: You will hear key tones when you type.

Example:

 Audio SoundsAndAlerts KeyTones Mode: Off

Audio SoundsAndAlerts RingTone

When using the Touch screen control panel: Choose a ringtone from the list. If the setting 

UserInterface UserPreferences has been set to On, the Ringtone setting is available from the 

Settings menu. If the setting UserInterface UserPreferences has been set to Off, the Ringtone 

setting is available from the Administrator settings, and you must login with username and 

password.
When using the web interface: Enter the name of the ringtone for incoming calls. To see the 

list of valid ringtones: navigate to Configuration > Personalization > Ringtone > Select active 

ringtone.

Requires user role: USER
Value space: <S: 1, 100>

Format: String with a maximum of 100 characters.

Example:

 Audio SoundsAndAlerts RingTone: "Sunrise"

Audio SoundsAndAlerts RingVolume

Sets the ring volume for an incoming call.

Requires user role: USER
Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.

Example:

 Audio SoundsAndAlerts RingVolume: 50

Audio Volume

Set the speaker volume.

Requires user role: USER
Value space: <0..100>

Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the 

range from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched 

off.

Example:

 Audio Volume: 70

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings