Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.08 MX200 and MX300 Administrator Guide TC7.0, DECEMBER 2013.  

www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 

72

Cisco TelePresence MX200 and MX300  

Administrator Guide

Network [1..1] RemoteAccess Allow

Filter IP addresses for access to ssh/telnet/HTTP/HTTPS.

Requires user role: ADMIN
Value space: <S: 0, 255>

Format: String with a maximum of 255 characters, comma separated IP adresses or IP 

range.

Example:

 Network 1 RemoteAccess Allow: "192.168.1.231, 192.168.1.182"

Network [1..1] VLAN Voice Mode

Set the VLAN voice mode. The VLAN Voice Mode will be set to Auto automatically if you 

choose Cisco UCM (Cisco Unified Communications Manager) as provisioning infrastructure via 

the Provisioning Wizard on the Touch screen control panel.

Requires user role: ADMIN
Value space: <Auto/Manual/Off>

Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If 

CDP is not available, VLAN is not enabled. 
Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is 

available, the manually set value will be overruled by the value assigned by CDP.
Off: VLAN is not enabled.

Example:

 Network 1 VLAN Voice Mode: Off

Network [1..1] VLAN Voice VlanId

Set the VLAN voice ID. This setting will only take effect if VLAN Voice Mode is set to Manual.

Requires user role: ADMIN
Value space: <1..4094>

Range: Select a value from 1 to 4094.

Example:

 Network 1 VLAN Voice VlanId: 1

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings