Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.08 MX200 and MX300 Administrator Guide TC7.0, DECEMBER 2013.

Cisco TelePresence MX200 and MX300

Administrator Guide

NetworkServices SNMP SystemContact

Enter the name of the Network Services SNMP System Contact.

Requires user role: ADMIN
Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

NetworkServices SNMP SystemContact: ""

NetworkServices SNMP SystemLocation

Enter the name of the Network Services SNMP System Location.

Requires user role: ADMIN
Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

NetworkServices SNMP SystemLocation: ""

NetworkServices SSH Mode

SSH (or Secure Shell) protocol can provide secure encrypted communication between the

codec and your local computer.

Requires user role: ADMIN
Value space: <Off/On>

Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.

Example:

NetworkServices SSH Mode: On

NetworkServices SSH AllowPublicKey

Secure Shell (SSH) public key authentication can be used to access the codec.

Requires user role: ADMIN
Value space: <Off/On>

Off: The SSH public key is not allowed.
On: The SSH public key is allowed.

Example:

NetworkServices SSH AllowPublicKey: On

NetworkServices CTMS Mode

This setting determines whether or not to allow multiparty conferences controlled by a Cisco

TelePresence Multipoint Switch (CTMS).
Video systems running software TC5.0 or later are able to initiate or join non-encrypted

multiparty conferences controlled by CTMS version 1.8 or later. Encrypted conferences are

supported as from software versions TC6.0 and CTMS 1.9.1. Encryption is addressed in the

NetworkServices CTMS Encryption setting.

Requires user role: ADMIN
Value space: <Off/On>

Off: Multiparty conferencing via CTMS is prohibited.
On: Multiparty conferencing via CTMS is allowed.

Example:

NetworkServices CTMS Mode: On

NetworkServices CTMS Encryption

This setting indicates whether or not the video system supports encryption when participating

in a multiparty meeting controlled by a Cisco TelePresence Multipoint Switch (CTMS).
CTMS allows three security settings for meetings: non-secure (not encrypted), best effort

(encrypted if all participants support encryption, otherwise not encrypted) and secure (always

encrypted).

Requires user role: ADMIN
Value space: <Off/BestEffort>

Off: The video system does not allow encryption and therefore cannot participate in a secure

CTMS meeting (encrypted). When participating in a best effort CTMS meeting, the meeting

will be downgraded to non-secure (not encrypted).
BestEffort: The video system can negotiate encryption parameters with CTMS and

participate in a secure CTMS meeting (encrypted). Do not use this value if the CTMS version

is older than 1.9.1.

Example:

NetworkServices CTMS Encryption: Off

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings