Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

Pagina di 117
D14850.07 MX Series Administrator Guide TC6.3, OCTOBER 2013.  
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 
101
Cisco TelePresence MX Series  
Administrator Guide
Video OSD AutoSelectPresentationSource
Not applicable in this version.
Video OSD CallSettingsSelection
Not applicable in this version.
Video OSD TodaysBookings
Not applicable in this version.
Video OSD MyContactsExpanded
Not applicable in this version.
Video OSD Output
Not applicable in this version.
Video OSD InputMethod InputLanguage
Not applicable in this version.
Video OSD InputMethod Cyrillic
Not applicable in this version.
Video OSD LoginRequired
Not applicable in this version.
Video AllowWebSnapshots
Allow or disallow snapshots being taken of the local input sources, remote sites and 
presentation channel. If allowed, the web interface Call Control page will show snapshots both 
when idle and in a call.
NOTE: This feature is disabled by default, and must be enabled from the Touch controller.
Requires user role: ADMIN
Value space: <Off/On>
Off: Capturing web snapshots is not allowed.
On: Web snapshots can be captured and displayed on the web interface.
Example:
 Video AllowWebSnapshots: Off
Video Output LCD [1] Resolution
Set the screen resolution.
Requires user role: ADMIN
Value space: <1920_1080_60>
Range: The screen resolution is 1920 x 1080 60 Hz.
Example:
 Video Output LCD 1 Resolution: 1920 _ 1080 _ 60
Video Output LCD [1] MonitorRole
Set the LCD monitor role. 
Set the LCD monitor role. Do not change this setting manually; keep the default setting.
Value space: <InternalSetup>
InternalSetup: The internal setup as defined by the Touch controller will be used.
Video Output LCD [1] Brightness
Set the brightness level for the monitor.
Requires user role: ADMIN
Value space: <0..100>
Range: Select a value from 0 to 100.
Example:
 Video Output LCD 1 Brightness: 50
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
System settings