Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.07 MX Series Administrator Guide TC6.3, OCTOBER 2013.  

www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 

56

Cisco TelePresence MX Series  

Administrator Guide

Cameras Camera [1..1] Gamma Level

By setting the Gamma Level you can select which gamma correction table to use. This setting 

may be useful in difficult lighting conditions, where changes to the brightness setting does not 

provide satisfactory results. NOTE: Requires the Gamma Mode to be set to Manual.

Requires user role: ADMIN
Value space: <0..7>

Range: Select a value from 0 to 7.

Example:

 Cameras Camera 1 Gamma Level: 0

Cameras Camera [1..1] Mirror

Not applicable in this version.

Cameras Camera [1..1] Whitebalance Mode

Set the camera whitebalance mode.

Requires user role: ADMIN
Value space: <Auto/Manual>

Auto: The camera will continuously adjust the whitebalance depending on the camera view.
Manual: Enables manual control of the camera whitebalance. The whitebalance level is set 

using the Cameras Camera Whitebalance Level setting.

Example:

 Cameras Camera 1 Whitebalance Mode: Auto

Cameras Camera [1..1] Whitebalance Level

Set the whitebalance level. NOTE: Requires the Camera Whitebalance Mode to be set to 

manual.

Requires user role: ADMIN
Value space: <1..16>

Range: Select a value from 1 to 16.

Example:

 Cameras Camera 1 Whitebalance Level: 1

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings