Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
78
Cisco TelePresence MX Series
Administrator Guide
SerialPort settings
SerialPort Mode
Enable/disable the serial port.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: Disable the serial port.
On: Enable the serial port.
On: Enable the serial port.
Example:
SerialPort Mode: On
SerialPort BaudRate
Specify the baud rate (data transmission rate, bits per second) for the serial port. The default
value is 38400.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1; Flow
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1; Flow
control: None.
Requires user role: ADMIN
Value space: <9600/19200/38400/57600/115200>
Value space: <9600/19200/38400/57600/115200>
Range: Select a baud rate from the baud rates listed (bps).
Example:
SerialPort BaudRate: 38400
SerialPort LoginRequired
Determine if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Value space: <Off/On>
Value space: <Off/On>
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
On: Login is required when connecting to the codec via the serial port.
Example:
SerialPort LoginRequired: On
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
System settings