Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

Pagina di 110
D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.  
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved. 
91
Cisco TelePresence MX Series  
Administrator Guide
Video SelfviewControl AutoResizing
The size of the self view frame can be configured to automatically change according to the 
following rules. The size is reduced from full screen to PiP (picture-in-picture) when there is a 
change in a frame that overlaps with the self view frame. The size is increased from PiP to full 
screen when nothing else is displayed on the monitor. The last rule does not apply to monitors 
with MonitorRole set to First.
Requires user role: ADMIN
Value space: <Off/On>
Off: Self view will not be automatically resized.
On: Self view is automatically resized as described above.
Example:
 Video SelfviewControl AutoResizing: On
Video SelfviewDefault Mode
Determine if the main video source (self view) shall be displayed on screen after a call. 
The position and size of the self view window is determined by the Video SelfviewDefault 
PIPPosition and the Video Selfview FullscreenMode settings respectively.
This setting obsoletes the Video Selfview setting as from TC6.0.
Requires user role: ADMIN
Value space: <Off/Current/On>
Off: Self view is switched off when leaving a call.
Current: Self view is left as is, i.e. if it was on during the call, it remains on after the call; if it 
was off during the call, it remains off after the call.
On: Self view is switched on when leaving a call.
Example:
 Video SelfviewDefault Mode: Current
Video SelfviewDefault FullscreenMode
Determine if the main video source (self view) shall be shown in full screen or as a small 
picture-in-picture (PiP) after a call. The setting only takes effect when self view is switched on 
(see the Video SelfviewDefault Mode setting).
Requires user role: ADMIN
Value space: <Off/Current/On>
Off: Self view will be shown as a PiP.
Current: The size of the self view picture will be kept unchanged when leaving a call, i.e. if it 
was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the call, it 
remains fullscreen after the call.
On: The self view picture will be shown in fullscreen.
Example:
 Video SelfviewDefault FullscreenMode: Current
Video SelfviewDefault PIPPosition
Determine the position on screen of the small self view picture-in-picture (PiP) after a call. The 
setting only takes effect when self view is switched on (see the Video SelfviewDefault Mode 
setting) and fullscreen view is switched off (see the Video SelfviewDefault FullscreenMode 
setting).
Requires user role: ADMIN
Value space: <Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/
LowerRight >
Current: The position of the self view PiP will be kept unchanged when leaving a call.
UpperLeft: The self view PiP will appear in the upper left corner of the screen.
UpperCenter: The self view PiP will appear in the upper center position.
UpperRight: The self view PiP will appear in the upper right corner of the screen.
CenterLeft: The self view PiP will appear in the center left position.
CentreRight: The self view PiP will appear in the center right position.
LowerLeft: The self view PiP will appear in the lower left corner of the screen.
LowerRight: The self view PiP will appear in the lower right corner of the screen.
Example:
 Video SelfviewDefault PIPPosition: Current
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
System settings