Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
D14850.04 MX Series Administrator Guide TC6.0, JANUARY 2013.
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
104
Cisco TelePresence MX Series
Administrator Guide
Touch
Factory resetting the Touch 8”
controller
You must use the New message indicator and Mute buttons
to reset the Touch 8” controller to its default factory settings.
When factory resetting the Touch controller the logs will be
cleared, and the configuration and pairing information are
lost.
The Touch controller restarts after the reset and receives a
new configuration automatically from the video system.
It is not possible to undo a factory reset.
1. Locate the
New message indicator
and
Mute
buttons.
The
New message indicator
is a bit hard to see, but it is
the button with the exclamation mark on it.
2. Press and hold the
New message indicator
until it lights
up (approximately 10 seconds).
3. Press the
Mute
button twice.
The Touch controller automatically reverts to the default
factory settings and restarts.
Mute button
New
message
indicator
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
Appendices