Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

D14850.04 MX Series Administrator Guide TC6.0, JANUARY 2013.

Cisco TelePresence MX Series

Administrator Guide

SystemUnit settings

SystemUnit Name

Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured

on the system then this ID will be used instead of the system name. The system name will be

displayed:
1) When the codec is acting as an SNMP Agent.
2) Towards a DHCP server.

Requires user role: ADMIN
Value space: <S: 0, 50>

Format: String with a maximum of 50 characters.

Example:

SystemUnit Name: "Meeting Room"

SystemUnit MenuLanguage

Select the language to be used on the Touch controller.

Requires user role: USER
Value space: <English/ChineseSimplified/Danish/Dutch/Finnish/French/German/Italian/

Japanese/Korean/Norwegian/Portuguese-Brazilian/Russian/Spanish/Swedish>

Example:

SystemUnit MenuLanguage: English

SystemUnit ContactInfo Type

Choose which type of contact information to show in the status field in the upper left corner of

the Touch controller.

Requires user role: ADMIN
Value space: <Auto/None/IPv4/IPv6/H323Id/E164Alias/H320Number/SipUri/SystemName/

DisplayName>

Auto: Show the address which another system can dial to reach this system. The address

depends on the default call protocol and system registration.
None: Do not show any contact information in the status field.
IPv4: Show the IPv4 address as contact information.
IPv6: Show the IPv6 address as contact information.
H323Id: Show the H.323 ID as contact information (see the H323 Profile [1..1] H323Alias ID

setting).
E164Alias: Show the H.323 E164 Alias as contact information (see the H323 Profile [1..1]

H323Alias E164 setting).
H320Number: Show the H.320 number as contact information (only applicable if connected

to a Cisco TelePresence ISDN Link gateway).
SipUri: Show the SIP URI as contact information (see the SIP Profile [1..1] URI setting).
SystemName: Show the system name as contact information (see the SystemUnit Name

setting).
DisplayName: Show the display name as contact information (see the SIP Profile [1..1]

DisplayName setting).

Example:

SystemUnit ContactInfo Type: Auto

SystemUnit CallLogging Mode

Set the call logging mode for calls that are received or placed by the system. The call logs may

then be viewed via the web interface.

Requires user role: ADMIN
Value space: <Off/On>

Off: Disable logging.
On: Enable logging.

Example:

SystemUnit CallLogging Mode: On

Contents

Introduction

System settings

Setting passwords

Appendices

Web interface

System settings