Cisco Cisco TelePresence MX700 Dépliant
How to create a new SIP Profile
Log in to Cisco Unified CM Administration and navigate to Device > Device Settings > SIP Profile.
Log in to Cisco Unified CM Administration and navigate to Device > Device Settings > SIP Profile.
Creating a SIP profile
1. Navigate to Device > Device Settings > SIP Profile
2. Use the search options available on the page, or leave the search field
blank and press Find to list all.
3. Locate the file you would like to copy and click the Copy button. This will
take you to the SIP Profile Configuration page.
You may give the profile a new name, or you can keep the default SIP
You may give the profile a new name, or you can keep the default SIP
profile name. If the latter, you will overwrite the template and use the
modified profile as your default SIP profile.
4. Navigate to the SIP Profile Information section:
SDP Session-level Bandwidth Modifier for Early Offer and Re-invites: Set
to TIAS and AS.
Redirect by Application: Enable by checking the check box.
Use Fully Qualified Domain Name in SIP Requests: Enable by checking
the check box.
5. Navigate to the Trunk Specific Configuration section:
Allow Presentation Sharing using BFCP: Enable by checking the check
box.
Click Apply Config.
Device
Device Settings
SIP Profile
1
3
4
2
5
Cisco TelePresence Endpoints running TC6 and Cisco Unified Communications Manager 9.0
Quick Reference Guide
D14996.01 Administering TC6 Endpoints on CUCM 9.0, January 2013.
www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
16
Contents
Introduction
Endpoint configuration
CUCM configuration
Setting passwords
Appendices
CUCM configuration