Cisco Cisco TelePresence MX700 Guida Utente
47
D1458220 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: July 2014 for TC7.2
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: July 2014 for TC7.2
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Camera
Speaker Tracking
To enable
Speaker
Tracking, tap
Camera, as outlined.
Activate the Speaker Tracking
feature by tapping as outlined.
Tap anywhere outside
the menu to exit.
To deactivate Speaker
Tracking, repeat the
procedure.
Pos. 1
Systems equipped with a speaker
tracking camera system use two
cameras working together with
a built-in microphone array. The
system will track and show the
person speaking so that you won’t
have to use the Camera Control
menu or Camera Presets to zoom in
and out.
tracking camera system use two
cameras working together with
a built-in microphone array. The
system will track and show the
person speaking so that you won’t
have to use the Camera Control
menu or Camera Presets to zoom in
and out.
When speaker tracking has been
activated, the camera position
presets will still be available.
However, if you tap a camera
position preset while in speaker
tracking mode, one of the cameras
will respond accordingly and the
speaker tracking will be deactivated.
activated, the camera position
presets will still be available.
However, if you tap a camera
position preset while in speaker
tracking mode, one of the cameras
will respond accordingly and the
speaker tracking will be deactivated.
Activate speaker tracking as shown
on this page again, if needed.
About Speaker Tracking