Cisco Cisco TelePresence MX700 Guida Utente

73

D1458220 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: July 2014 for TC7.2
All contents © 2010–2014  
Cisco Systems, Inc. All rights reserved. 

You may gain access to your video 

system through its web interface, see 
the Administration Guide for more. 

From the web interface you may gen-
erate snapshots of the video stream 
from your system. You may also 
generate snapshots from the outgoing 
video of the far end system.

However, you cannot take snapshots 
unless you have set the Allow Web 

Snapshots to ON, as shown here.

Snapshots cannot be taken if the call is 
encrypted. Encryption will disable the 
snapshot feature at both ends, regard-
less of the local settings of the Allow 

Web Snapshots parameter.

The web snapshot feature applies to 

Point-to-Point as well as MultiSite calls 
(but to unencrypted calls only).

In this context a MultiWay call should 
be regarded as a variant of Point-
to-Point call as it is the MCU who is 
controlling the call and your system is 
connected to the MCU as in a Point-
to-Point call.

Caution! There is no Cancel function 
letting you exit the menu undoing any 
changes you have made. Take care!

Settings

Administrator Settings—Web Snapshots

About Snapshots

To exit 

Settings, tap 

Back.

To exit Settings 

as such, tap 

Exit.

Note that there 

is no Cancel 

function letting 

you exit the 

menu undoing 

any changes you 

have made.

 Take care!

Note! Using y

our video syst

em’s web int

erface you ma

y 

take snapshots of the video str

eam from your syst

em by 

setting Allow W

 to On.

Observe that the far end ma

y take snapshots of the 

outgoing video of y

our system, e

ven if you ha

ve set your 

own Allow W

 to OFF.  

Likewise, you ma

y take snapshots of the out

going video 

of the far end, e

ven if the far end has set 

Snapshots to

 OFF, provided that y

ou have set y

our own 

system’s Allo

 to ON.