Cisco Cisco TelePresence MX700 Guida All'Installazione

Configure H.323 and SIP

(When not set by a provisioning system)
To get online and ready to place and receive calls, your system 

must be set up properly. Your system uses either the H.323 

protocol or the SIP protocol for video calls.
The diagnostics on your system will indicate if there is a 

problem with H.323 or SIP registering.
If you wish to change the other H.323 or SIP settings, see the 

administrator guide for your product.
For networks administered through Cisco TMS (Cisco 

TelePresence Management Suite), your Cisco TMS adminis-

trator will help you to get online.
You can find information about administering through Cisco 

UCM in the 

 guide.

H.323

If in doubt for any of the parameters below, contact your system 

administrator or your service provider.

1.  Go to the 

tab, and select

.

2.  Open the 

 settings from the left sidebar.

3.  Under the 

 heading enter the 

and the 

 

number in the corresponding input fields.

4.  Enter the 

 in the corresponding input 

field.

5.  If the H.323 gatekeeper requires authentication, and you 

want your system to authenticate itself to the gatekeeper, 

go to the 

 subheading and select 

 in 

the 

 drop down list. Then enter the 

and 

 in the corresponding input fields.

Otherwise, select 

in the 

 drop down list.

SIP

If in doubt for any of the parameters below, contact your system 

administrator or your service provider.

1.  Go to the 

tab, and select

.

2.  Open the 

 settings from the left sidebar.

3.  Enter the SIP URI in the 

input field, and optionally a 

display name in the 

 input field.

4.  Select the preferred transport protocol from the 

 drop down list. If you select 

, the 

system first tries to connect using Tls, then TCP, and finally 

UDP.

5.  Select a proxy type in the 

 drop down list. The default 

type is 

. You can use 

 when registering to 

CUCM.

6.  Enter the 

 in the corresponding input field

7.  If the SIP proxy requires authentication, you must enter a 

login name and password to authenticate your system. Go 

to the 

 heading and enter the 

and 

 in the corresponding input fields.

If you are changing a value setting, 

you have to always click 

to confirm the change.

Cisco TelePresence Video Systems

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016. 

Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

17

Getting Started Guide

Introduction

User interfaces

Web interface

Setup assistant

Appendices



Touch

Web interface