Cisco Cisco TelePresence MX700 Guida All'Installazione

Configure H.323 and SIP

(When not set by a provisioning system)

To get online and ready to place and receive calls, your 

system must be set up properly. Your system uses either the 

H.323 protocol or the SIP protocol for video calls.

NOTE:

 Contact your system administrator, or service provider, 

for information about the network settings.
For networks administered through Cisco TMS (TelePresence 

Management Suite), your Cisco TMS administrator will help 

you to get online.

You can find information about administering through Cisco 

UCM in the 

 guide.

H.323

If in doubt about any of the parameters below, contact your 

system administrator or your service provider.

1.  Tap the gearwheel icon in the upper left corner and tap 

. 

2.  Enter the 

and 

in their respective 

input fields.

3.  Enter the

in the corresponding input 

field. 

4.  If the H.323 gatekeeper requires authentication and you 

want your system to authenticate itself to the gatekeeper, 

tap 

 in the 

 section and enter the 

and 

 in their respective input fields. 

Otherwise, tap 

.

5.  Tap 

 to confirm the changes, or 

 to leave 

without saving.

6.  Review the System Information page and verify the H323 

settings.

If you have successfully registered to the Gatekeeper, 

the 

is shown as 

in the H323 section.

7.  Tap 

 to return to the home menu.

SIP

If in doubt about any of the parameters below, contact your 

system administrator or your service provider.

1.  Tap the gearwheel icon in the upper left corner and tap 

. 

2.  Enter the SIP URI in the 

 input field.

3.  Tap the preferred transport protocol in the 

section. If you select 

, the system tries 

first to connect using TLS, then TCP, and finally UDP.

4.  Select a 

 

by tapping 

 or 

. The default type is 

. You can use 

 when registering to CUCM.

5.  Enter the

in the corresponding input field.

6.  If the SIP proxy server requires authentication, you must 

enter the 

and 

 in their respective 

input fields to authenticate your system.

7.  Tap 

 to confirm the changes, or 

 to leave 

without saving.

8.  Review the System Information page and verify the SIP 

settings.

If you have successfully registered to a SIP server, the 

 is shown as 

in the SIP section.

9.  Tap 

 to return to the home menu.

Cisco TelePresence Video Systems

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016. 

Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

29

Getting Started Guide

Introduction

User interfaces

Web interface

Setup assistant

Appendices



Touch

Touch