Intel 9110N NE80567KE025003 Manuale Utente
Codici prodotto
NE80567KE025003
System Management Bus Interface
108
Intel
®
Itanium
®
Processor 9300 Series Datasheet
6.4.4.6
Minimum Memory Transfer Rate
Offset 3Ch-3Eh provides minimum “operating” memory transfer rate.
6.4.4.7
Uncore Voltage
Offset 3Fh-40h is the nominal processor Uncore voltage for this part, rounded to the
next thousandthin mV and reflected in BCD.
next thousandthin mV and reflected in BCD.
Example: 1200 mV is stored as 3Fh: 00, 40h: 12h.
6.4.4.8
Uncore Voltage Tolerance
Offset 41h and 42h contain the Uncore voltage tolerances, high and low respectively.
These use a decimal to hexadecimal conversion. Example: 20 mV tolerance would be
saved as 14h.
These use a decimal to hexadecimal conversion. Example: 20 mV tolerance would be
saved as 14h.
6.4.5
Cache Data
This section contains cache related data.
6.4.5.1
L3 Cache Size
Offset 46h-47h is the L3 cache size field. The field reflects the size of the level three
cache in MBytes in bcd format.
cache in MBytes in bcd format.
Example: The Intel Itanium processor 9300 series has a 24 MB L3 cache. Thus, offsets
46h & 47h will contain 24 & 00 respectively.
46h & 47h will contain 24 & 00 respectively.
6.4.5.2
Cache Voltage
Offset 48h-49h is the nominal processor cache voltage for this part, rounded to the
next thousandth in mV and reflected in BCD.
next thousandth in mV and reflected in BCD.
6.4.5.3
Cache Voltage Tolerance
Offset 4Ah and 4Bh contain the cache voltage tolerances, high and low respectively.
These use a decimal to hexadecimal conversion. Example: 20 mV tolerance would be
saved as 14h.
These use a decimal to hexadecimal conversion. Example: 20 mV tolerance would be
saved as 14h.
6.4.6
Package Data
6.4.6.1
Package Revision
This section describes the package revision location at offset 4Fh-53h used to capture
package technology. This field tracks the highest level revision. It is provided in ASCII
hex format of five characters.
package technology. This field tracks the highest level revision. It is provided in ASCII
hex format of five characters.
6.4.6.2
Substrate Revision Software ID
This field is at offset 54h for the substrate layout design.
6.4.7
Part Number Data
This section between 56h and 6Ah provides part tracing ability.