Cisco Cisco Firepower Management Center 2000
1
Cisco Systems, Inc.
www.cisco.com
FireSIGHT System Release Notes
Version 5.4.0.7 and Version 5.4.1.6
First Published: March 28, 2016
Last Updated: December 1, 2016
First Published: March 28, 2016
Last Updated: December 1, 2016
Even if you are familiar with the update process, make sure you thoroughly read and understand these release notes,
which describe supported platforms, new and changed features and functionality, known and resolved issues, and
product and web browser compatibility. They also contain detailed information on prerequisites, warnings, and specific
installation instructions for the following appliances:
which describe supported platforms, new and changed features and functionality, known and resolved issues, and
product and web browser compatibility. They also contain detailed information on prerequisites, warnings, and specific
installation instructions for the following appliances:
Series 3 Defense Centers (the DC750, DC1500, DC2000, DC3500, and the DC4000)
Series 2 and Series 3 managed devices (the 3D500, 3D1000, 3D2000,3D7010, 3D7020, 3D7030, 3D7050, 3D7110,
3D7115, 3D7120, 3D7125, 3D8120, 3D8130, 3D8140, 3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360,
3D8370, 3D8390, AMP7150, AMP8050, AMP8150, AMP8350, AMP8360, AMP8370, and the AMP8390)
3D7115, 3D7120, 3D7125, 3D8120, 3D8130, 3D8140, 3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360,
3D8370, 3D8390, AMP7150, AMP8050, AMP8150, AMP8350, AMP8360, AMP8370, and the AMP8390)
Cisco ASA with FirePOWER Services (the ASA5506-X, ASA5506H-X, ASA5506W-X, ASA5508-X, ASA5512-X,
ASA5515-X, ASA5516-X, ASA5525-X, ASA5545-X, ASA5555-X, ASA5585-X-SSP-10, ASA5585-X-SSP-20,
ASA5585-X-SSP-40, ASA5585-X-SSP-60, and the ISA 3000)
ASA5515-X, ASA5516-X, ASA5525-X, ASA5545-X, ASA5555-X, ASA5585-X-SSP-10, ASA5585-X-SSP-20,
ASA5585-X-SSP-40, ASA5585-X-SSP-60, and the ISA 3000)
64-bit virtual Defense Centers and managed devices
Tip:
For detailed information on the FireSIGHT System, refer to the online help or download the FireSIGHT System User
Guide from the Support site.
These release notes are valid for Version 5.4.0.7 and Version 5.4.1.6 of the FireSIGHT System. You can update physical
and virtual managed devices to Version 5.4.0.7. You can update Cisco ASA FirePOWER modules, physical Defense
Center, and virtual Defense Centers to Version 5.4.1.6. Note that you can update appliances in the following manner:
and virtual managed devices to Version 5.4.0.7. You can update Cisco ASA FirePOWER modules, physical Defense
Center, and virtual Defense Centers to Version 5.4.1.6. Note that you can update appliances in the following manner:
Defense Centers (the DC750, DC1500, DC2000, DC3500, and the DC4000) must be running Version 5.4 to update
to Version 5.4.1.6. If your Defense Center is running an earlier version, you must update to Version 5.4 before
updating to Version 5.4.1.6.
to Version 5.4.1.6. If your Defense Center is running an earlier version, you must update to Version 5.4 before
updating to Version 5.4.1.6.
Note:
A Defense Center may update its devices while running Version 5.4, but you will be unable to decrypt or
inspect SSL traffic if your Defense Center remains at Version 5.4. If you plan on decrypting or inspecting SSL traffic,
update your Defense Center to Version 5.4.1.6.
update your Defense Center to Version 5.4.1.6.
Series 2 devices (the 3D500, 3D1000, 3D2000, 3D2100, 3D2500, 3D3500, 3D4500, and the 3D6500) must be
running Version 5.4.0.5 to update to Version 5.4.0.7. If your Series 2 device is running an earlier version, you must
update to Version 5.4.0.5 before updating to Version 5.4.0.7.
running Version 5.4.0.5 to update to Version 5.4.0.7. If your Series 2 device is running an earlier version, you must
update to Version 5.4.0.5 before updating to Version 5.4.0.7.
Series 3 devices (the 3D7010, 3D7020, 3D7030, 3D7050, 3D7110, 3D7115, 3D7120, 3D7125, 3D8120, 3D8130,
3D8140, 3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360, 3D8370, 3D8390, AMP7150, AMP8050, AMP8150,
AMP8350, AMP8360, AMP8370, and the AMP8390) must be running Version 5.4.0.5 to update to Version 5.4.0.7.
If your Series 3 device is running an earlier version, you must update to Version 5.4.0.5 before updating to Version
5.4.0.7.
3D8140, 3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360, 3D8370, 3D8390, AMP7150, AMP8050, AMP8150,
AMP8350, AMP8360, AMP8370, and the AMP8390) must be running Version 5.4.0.5 to update to Version 5.4.0.7.
If your Series 3 device is running an earlier version, you must update to Version 5.4.0.5 before updating to Version
5.4.0.7.
ASA FirePOWER modules (the ASA5512-X, ASA5515-X, ASA5525-X, ASA5545-X, ASA5555-X,
ASA5585-X-SSP-10, ASA5585-X-SSP-20, ASA5585-X-SSP-40, and the ASA5585-X-SSP-60) must be running
at least Version 5.4 to update to Version 5.4.0.7. If your ASA FirePOWER module is running an earlier version, you
must update to Version 5.4.0.5 before updating to Version 5.4.0.7.
ASA5585-X-SSP-10, ASA5585-X-SSP-20, ASA5585-X-SSP-40, and the ASA5585-X-SSP-60) must be running
at least Version 5.4 to update to Version 5.4.0.7. If your ASA FirePOWER module is running an earlier version, you
must update to Version 5.4.0.5 before updating to Version 5.4.0.7.