Cisco Cisco Content Security Management Appliance M390 Guida All'Installazione
These simple-to-follow steps will allow you to
install, confi gure, and start using your IronPort
M160 Security Management Appliance right away.
install, confi gure, and start using your IronPort
M160 Security Management Appliance right away.
Before you start, be sure you have the following:
• Rack cabinet enclosure
• Dell 9G Combination Rails - Rapid/Versa Combination Rails
and adaptor kits (optional)
• 10/100/Gigabit BaseT TCP/IP local area network (LAN)
• Web browser software
Check to make sure the following items are present in the IronPor t
Security Management Appliance system box:
• IronPort M-Series Security Management Appliance
• Straight power cable
• Ethernet
™
cable
• IronPor t M-Series Quickstar t Guide (this guide)
• Documentation CD
• Safety and Compliance Guide
Note:
You can download the AsyncOS Release Notes from the IronPor t
Customer Suppor t Por tal located at www.suppor t.ironpor t.com.
IronPort M160
Documentation
CD
Quickstar t
Guide
I R O N P O R T C 1 6 0
Safety and
Compliance Guide
PLAN THE INSTALLATION WITHIN YOUR NETWORK
The IronPort Security Management appliance is designed to serve as
an external or “off box” location to monitor corporate policy settings
and audit information. It combines hardware, an operating system
(AsyncOS), and supporting services to centralize and consolidate
important policy and runtime data. The M-Series appliance is designed
to sit within your inner DMZ and receive quarantined spam from IronPort
C- and X-Series appliances in your outer DMZ. Internal users access the
M-Series appliance to view and manage messages in their quarantines.
Note: Cisco IronPort recommends that you contact a sales engineer
from your Certifi ed VAR or Cisco IronPort to participate in the planning
and implementation of the install. Cisco IronPort also recommends that
you contact your sales engineer for any installation questions.
Depending on your network confi guration, your fi rewall may
need to be confi gured to allow access on the following por ts.
SMTP and DNS ser vices must have access to the Internet.
For other system functions, the following ser vices may be required:
• SMTP: por t 6025 and 25
• DNS: por t 53
• HTTP: por t 80 or 82
• HTTPS: por t 83 or 443
• SSH: por t 22
• Telnet: por t 23
• LDAP: por t 389 or 3268
• NTP: por t 123
• LDAP over SSL: por t 636
• LDAP with SSL for Global Catalog queries: por t 3269
• FTP: por t 21, data por t TCP 1024 and higher
• Quarantine Authentication: 110(POP) and/or 143(IMAP)
See the appendix, “Firewall Information” in the IronPor t AsyncOS
for Security Management User Guide for more information.
INSTALL IN RACK
Install the IronPor t appliance into your rack cabinet. Ensure the
ambient temperature around the system is within the specifi ed limits.
Ensure there is suffi cient airfl ow around the unit.
SETUP AND MANAGEMENT
• Confi gure your laptop’s network connection to use an IP address
on the same subnet as the IronPor t appliance (192.168.42.xx).
• For Windows users, in the Network Connections box, right-click
on the connection and select Proper ties. On the Connection
Proper ties proper ties sheet, select Internet Protocol in the
Items menu and click the Proper ties button. Enter an IP address
(192.168.42.xx), a subnet mask (255.255.255.0), and a default
gateway (192.168.42.1). Confi rm your selection.
• For UNIX and Mac users, consult relevant product documentation.
• Connect your laptop to the Data 1 network por t using the
included Ethernet
™
cable.
POWER
• Plug the female end of each straight power cable into the power
supply on the back panel of the appliance.
• Plug the male end into an electrical outlet.
Turn on the system power by pressing the On/Off switch on the
front panel of the the appliance. You must wait fi ve minutes for the
system to initialize the ver y fi rst time you power up before moving
to Step 5.
POWER
ETHERNET
CABLE
IronPor t C- or X-Series Appliances
Clients
Firewall
Firewall
Firewall
Groupware Ser ver
IronPor t M-Series
Appliance
Record critical
information from the
Networking Worksheet to
assist in completing the
System Setup Wizard.
• After completing the System Setup Wizard, you must confi gure
the IronPor t Spam Quarantine on the M-Series appliance.
For more information, see the IronPor t AsyncOS for Security
Management User Guide.
• Fill out the Networking Worksheet on the back of this
Quickstart Guide. Contact your network administrator if you
need assistance.
• Use a browser to connect to the following URL:
http://192.168.42.42
• Log in as:
Username:
admin
Password:
ironport
• The System Setup Wizard begins and you are prompted to enter
the admin password.
• Use the information from the Networking Worksheet to complete
the System Setup Wizard.
Networking Worksheet
IronPort Security Management Appliance
*
Indica
tes
requi
red
inform atio
n
©
Copyright
2006
IronPort ®
System s,
Inc.
All
rights
reserved.
The
IronPort
logo,
IronPort
System s,
I
ronPort
M-Series,
Virus
Outbreak
Fil
ters,
and
Sender
B
ase
are tradema rks
of
IronPort
System s,
Inc.
PN
421-005
9
1
Admin
Passw ord
Choose a
new pas
sw ord for the “admi
n” account:
*
Interface
/
IP
Address
IP address:
*
Netmask:
*
Netw ork
Gatew ay
Default Ga
tew ay
(
router) IP a
ddress: *
DNS
Use the In
ternet's
root DNS Se
rvers:
Use these DNS Se
rvers:
System
Tim e
NTP Server
(IP
address
or
hostname):
AutoSupport a
nd Ale
rts
Alert
e
m ail add
ress (i.
e.
w here to send
system ale
rts): *
Enable I
ronPort
AutoSupport?
Yes
No
Technical Support:
1-877-641-IRON (4766)
1-877-641-IRON (4766)
STRAIGHT
POWER CABLE
POWER CABLE
POWER