Cisco Cisco Content Security Management Appliance M390 Guida Utente
16-8
AsyncOS 8.3 for Cisco Content Security Management User Guide
Chapter 16 Troubleshooting
Remotely Resetting Appliance Power
Procedure
Step 1
Use IPMI to issue a supported power-cycling command to the IP address assigned to the Remote Power
Management port, which you configured earlier, along with the required credentials.
Management port, which you configured earlier, along with the required credentials.
For example, from a UNIX-type machine with IPMI support, you might issue the command:
ipmitool -I lan -H 192.0.2.1 -U remoteresetuser -P password chassis power reset
where
192.0.2.1
is the IP address assigned to the Remote Power Management port and
remoteresetuser
and
password
are the credentials that you entered while enabling this feature.
Step 2
Wait at least five minutes for the appliance to reboot.