Cisco Cisco Content Security Management Appliance M1070 Guida Utente
2-7
AsyncOS 9.6 for Cisco Content Security Management Appliances User Guide
Chapter 2 Setup, Installation, and Basic Configuration
Accessing the Security Management Appliance
Accessing the Web Interface
Procedure
Step 1
Open your web browser and type 192.168.42.42 in the IP address text field.
Step 2
Enter the following default values:
•
User name: admin
•
Password: ironport
Note
This password is NOT valid after you complete the System Setup Wizard, either using the web
interface or the command-line interface.
interface or the command-line interface.
Accessing the Command Line Interface
The command line interface, or CLI, is accessed on the Security Management appliance in the same way
that the CLI is accessed on all Cisco Content Security appliances. There are, however, some differences:
that the CLI is accessed on all Cisco Content Security appliances. There are, however, some differences:
•
System setup must be performed through the GUI.
•
Some CLI commands are not available on the Security Management appliance. For a list of which
commands are not supported, see the Cisco IronPort AsyncOS CLI Reference Guide for Cisco
Content Security Appliances.
commands are not supported, see the Cisco IronPort AsyncOS CLI Reference Guide for Cisco
Content Security Appliances.
For production deployments, you should use SSH to access the CLI. Use a standard SSH client to access
the appliance on port 22. For lab deployments, you can also use telnet; however, this protocol is not
encrypted.
the appliance on port 22. For lab deployments, you can also use telnet; however, this protocol is not
encrypted.
Supported Languages
With the appropriate license key, AsyncOS can display the GUI and CLI in any of the following
languages:
languages:
•
English
•
French
•
Spanish
•
German
•
Italian
•
Korean
•
Japanese
•
Portuguese (Brazil)
•
Chinese (traditional and simplified)
•
Russian