Cisco Cisco IOS Software Release 12.0(21)S1

1-Port Channelized OC-48/STM-16 ISE and 4-Port Channelized OC-12/STM-4 ISE Line Cards for the Cisco 12000 Series

Initial Configuration of the 1-Port Channelized OC-48/STM-16 ISE and 4-Port Channelized OC-12/STM-4 ISE Line Cards

1-Port Channelized OC-48/STM-16 ISE and 4-Port Channelized OC-12/STM-4 ISE Line Cards for the Cisco 12000 Series Router

Cisco IOS Release 12.0(33)S4

AUG mapping is only available for SDH framing.

s1s0 should be set to 2 for SDH framing.

Table 2

Interface Default Configuration Values

Parameter

Configuration Command

Default Value

Encapsulation

[no] encapsulation [hdlc | ppp |
frame-relay]

hdlc

Transmitter delay

[no] transmitter-delay [0..255]

Scramble (POS)

[no] pos scramble-atm

no pos scramble

Scramble (DS3/E3)

[no] scramble

no scramble

CRC (POS)

[no] crc [16 | 32]

16 for STS-3c/STM-1 POS
32 for STS-12c/STM-4 and
STS-48c/STM-16 POS

CRC (DS3/E3)

[no] crc [16 | 32]

MTU

[no] mtu [64..15360]

4470 bytes

Keepalive

[no] keepalive [0..32767]

10 seconds

Shutdown

[no] shutdown

shutdown

Loopback (POS)

[no] loopback [internal | network]

no loopback

Loopback (DS3)

[no] loopback [local | network |
remote]

no loopback

Loopback (E3)

[no] loopback [local | network]

no loopback

SONET overhead (POS)

[no] pos flag c2 [0..255]

207

SONET overhead (DS3/E3)

[no] overhead c2 [0..255]

SONET overhead (DS3/E3)

[no] overhead j1 message <string>

string is 15 characters

Thresholds (POS)

[no] pos threshold b3-tca [3..9]

6(10e-6)

BER threshold (DS3/E3)

[no] ber-threshold b3-tca [3..9]

6(10e-6)

Alarm reporting

[no] alarm-report [pais | plop | prdi |
b3-tca | all]

b3-tca, plop

Framing (DS3)

[no] framing [m13 | c-bit]

C-bit

Data inversion (DS3/E3)

[no] invert data

no invert data

DSU bandwidth (DS3)

[no] dsu bandwidth [1..44210]

44,210 Kbps

DSU mode (DS3/E3)

cisco

Remote request (DS3)

[no] dsu remote accept | fullrate

National bit (E3)

[no] national bit 1

no national bit 1