Cisco Cisco IOS Software Release 12.1(3)EC
Cisco uBR7200 Series Dynamic Upstream Modulation
debug cable freqhop
16
Cisco IOS Release 12.1(3a)EC1
debug cable freqhop
To display debug messages for frequency hopping, use the debug cable freqhop EXEC command. To
disable debugging output, use the no form of this command.
disable debugging output, use the no form of this command.
debug cable freqhop
no debug cable freqhop
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging for frequency hopping is not enabled.
Command Modes
EXEC mode.
Command History
Examples
Router# debug cable freqhop
CMTS freqhop debugging is on
Related Commands
Release
Modification
12.0(4)XI
This command was introduced.
12.(0)5T
This command was used.
12.1(3a)EC1
This command was used.
Command
Description
debug cable hw-spectrum
Displays messages for frequency hopping.