Cisco Cisco IOS Software Release 12.2(1)DX

To verify an accept or reject list, use one of the following commands in privileged EXEC mode:

This section provides the following configuration examples:

Router(config)# radius-server attribute list listname

Defines the list name given to the set of attributes 
defined in the attribute command.

The listname must be the same as the 
listname defined in Step 5.

Router(config-sg-radius)# attribute value1,[value2 

[value3...]]

Adds attributes to the configured accept or reject 
list. The value attribute can specify a single 
attribute (for instance, 22) or a range of attributes 
(for instance, 20-30).

This command can be used multiple times 
to add attributes to an accept or reject list.

Router# debug radius

Displays information associated with RADIUS.

Router# debug aaa accounting

Displays information on accountable events as 
they occur.

Router# debug aaa authentication

Displays information on AAA authentication.

Router# show radius statistics

Displays the RADIUS statistics for accounting 
and authentication packets.