Cisco Cisco IOS Software Release 12.4(2)XB6 Riferimenti tecnici
10
12.4(15)XR2
Command Reference for Cisco PDSN Release 4.0 in IOS Release 12.4(15)XR
cdma pdsn a10 ahdlc trailer
To enable the PDSN so that AHDLC frames are expected to contain trailer byte, use the cdma pdsn a10
ahdlc trailer command to in global configuration mode. To disable the PDSN so that AHDLC
processing does not expect the AHDLC trailer (0x7e), use the no form of this command.
ahdlc trailer command to in global configuration mode. To disable the PDSN so that AHDLC
processing does not expect the AHDLC trailer (0x7e), use the no form of this command.
cdma pdsn a10 ahdlc trailer
no cdma pdsn a10 ahdlc trailer
Syntax Description
There are no arguments or keywords for this command.
Defaults
The default behavior is that trailer byte 0x7e is expected in the AHDLC frames.
Command Modes
Global configuration
Command History
Usage Guidelines
When the no version of the command is configured, each AHDLC frame is considered a full AHDLC
fragment, and the PDSN will start processing the packet.
fragment, and the PDSN will start processing the packet.
Examples
The following example disables the PDSN so that AHDLC processing does not expect the AHDLC
trailer:
trailer:
Router (config)# no cdma pdsn a10 ahdlc trailer
Release
Modification
12.3(14)YX
This command was introduced.