Cisco Cisco IOS Software Release 12.4(2)XB6 Riferimenti tecnici

To specify one or more authentication, authorization, and accounting (AAA) methods for use on 
interfaces running IEEE 802.1X, use the aaa authentication dot1x command in global configuration 
mode. To disable authentication, use the no form of this command

aaa authentication dot1x {default | listname} method1 [method2...]

no aaa authentication dot1x {default | listname} method1 [method2...]

No authentication is performed.

Global configuration

Uses the listed authentication methods that follow this argument as the 
default list of methods when a user logs in. 

Character string used to name the list of authentication methods tried when 
a user logs in.

method1 [method2...]

At least one of these keywords:

enable—Uses the enable password for authentication.

group radius—Uses the list of all RADIUS servers for authentication.

line—Uses the line password for authentication.

local—Uses the local username database for authentication.

local-case—Uses the case-sensitive local username database for 
authentication.

none—Uses no authentication. The client is automatically authenticated 
by the switch without using the information supplied by the client.

12.1(6)EA2

This command was introduced for the Cisco Ethernet switch network 
module.

12.2(15)ZJ

This command was implemented on the following platforms for the 
Cisco Ethernet Switch Module: Cisco 2600 series, Cisco 3600 series, and 
Cisco 3700 series.

12.3(2)XA

This command was introduced on the following Cisco router platforms: 
Cisco 806, Cisco 831, Cisco 836, Cisco 837, Cisco 1701, Cisco 1710, 
Cisco 1721, Cisco 1751-V, and Cisco 1760.

12.3(4)T

This command was integrated into Cisco IOS Release 12.3(4)T. Router 
support was added for the following platforms: Cisco 1751, 
Cisco 2610XM – Cisco 2611XM, Cisco 2620XM – Cisco 2621XM, 
Cisco 2650XM – Cisco 2651XM, Cisco 2691, Cisco 3640, Cisco 3640A, 
and Cisco 3660.