Cisco Cisco IOS Software Release 12.4(2)XB6 Riferimenti tecnici
-29
Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
debug condition
debug condition
To enable conditional debugging on the BWG, use the debug condition command in privileged EXEC
mode.
mode.
debug condition [mac-address mac-id-of-subscriber] [ip bs-ip-address]
Syntax Description
Defaults
Command Modes
Privileged EXEC.
Command History
Usage Guidelines
When there is option to branch in the debug CLI, all the options after the keyword can be enabled by
using the carriage-return. For example:
using the carriage-return. For example:
To enable all the WiMAX BWG related debugs, enter:
router#debug wimax agw
To enable all the WiMAX BWG session related debugs, enter:
router#debug wimax agw session
Examples
The following example enables conditional debugging on the BWG:
Router#debug condition mac-address mac-id-of-subscriber
Rotuer#debug condition ip bs-ip-address
mac-address
mac-id-of-subscriber]
mac-id-of-subscriber]
based on the Subscriber MAC-ID
ip bs-ip-address
based on the BS IP address
Release
Modification
12.4(15)XL
This command was introduced.