Cisco Cisco IOS Software Release 12.2(27)SBC

Pagina di 20
      BGP Support for IP Prefix Import from Global Table into a VRF Table
Additional References
11
Cisco IOS Release: Multiple releases (see the Feature History table)
  Interfaces:
    Se3/0                   
VRF Table ID = 2
  Export VPN route-target communities
    RT:200:20               
  Import VPN route-target communities
    RT:200:20               
  No import route-map
  No export route-map
  VRF label distribution protocol: not configured
  VRF label allocation mode: per-prefix
The following example from the show ip bgp vpnv4 command shows the import route map names, the 
prefix import limit and the actual number of imported prefixes, and the individual import entries: 
Router# show ip bgp vpnv4 all 
BGP table version is 18, local router ID is 10.131.127.252
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
   Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 200:1 (default for vrf green)
Import Map: UNICAST, Address-Family: IPv4 Unicast, Pfx Count/Limit: 1/1000
*>i10.131.64.0/19   10.131.95.252            0    100      0 i
*> 172.16.1.1/32    172.16.2.1               0         32768 i
*> 172.16.2.0/30    0.0.0.0                  0         32768 i
*>i172.31.1.1/32    10.131.95.252            0    100      0 i
*>i172.31.2.0/30    10.131.95.252            0    100      0 i
Route Distinguisher: 200:2 (default for vrf red)
*> 172.16.1.1/32    172.16.2.1               0         32768 i
*> 172.16.2.0/30    0.0.0.0                  0         32768 i
*>i172.31.1.1/32    10.131.95.252            0    100      0 i
*>i172.31.2.0/30    10.131.95.252            0    100      0 i
Additional References
The following sections provide references related to the BGP Support for IP Prefix Import from Global 
Table into a VRF Table feature.
Related Documents
Related Topic
Document Title
BGP commands
BGP configuration tasks
BGP commands
MPLS VPN configuration tasks 
MPLS Virtual Private Networks, Cisco IOS Release 12.0(5)T
VRF Selection using Policy Based Routing 
VRF Selection Based on Source IP Address