Cisco Cisco IOS Software Release 15.0(1)SE
10
Release Notes for the Cisco IE 3010 Switch, Cisco IOS Release 15.0(2)SE and Later
OL-27309-02
Important Notes
Important Notes
Express Setup Notes
•
We recommend using this browser setting to speed up the time needed to display Express Setup from
Microsoft Internet Explorer.
Microsoft Internet Explorer.
1.
Choose Tools > Internet Options.
2.
Click Settings in the Temporary Internet files area.
3.
From the Settings window, choose Automatically.
4.
Click OK.
5.
Click OK to exit the Internet Options window.
•
The HTTP server interface must be enabled to display Express Setup. By default, the HTTP server
is enabled on the switch. Use the show running-config privileged EXEC command to see if the
HTTP server is enabled or disabled.
is enabled on the switch. Use the show running-config privileged EXEC command to see if the
HTTP server is enabled or disabled.
Beginning in privileged EXEC mode, follow these steps to configure the HTTP server interface:
•
Express Setup uses the HTTP protocol (the default is port 80) and the default method of
authentication (the enable password) to communicate with the switch through any of its Ethernet
ports and to allow switch management from a standard web browser.
authentication (the enable password) to communicate with the switch through any of its Ethernet
ports and to allow switch management from a standard web browser.
If you change the HTTP port, you must include the new port number when you enter the IP address
in the browser Location or Address field (for example, http://10.1.126.45:184, where 184 is the new
HTTP port number). Write down the port number through which you are connected. Use care when
changing the switch IP information.
in the browser Location or Address field (for example, http://10.1.126.45:184, where 184 is the new
HTTP port number). Write down the port number through which you are connected. Use care when
changing the switch IP information.
If you are not using the default method of authentication (the enable password), you need to
configure the HTTP server interface with the method of authentication used on the switch.
configure the HTTP server interface with the method of authentication used on the switch.
Command Purpose
Step 1
configure terminal
Enters global configuration mode.
Step 2
ip http authentication {aaa | enable |
local}
local}
Configures the HTTP server interface for the type of authentication that
you want to use.
you want to use.
•
aaa—Enables the authentication, authorization, and accounting
feature. You must enter the aaa new-model interface configuration
command for the aaa keyword to appear.
feature. You must enter the aaa new-model interface configuration
command for the aaa keyword to appear.
•
enable—Enables the password, which is the default method of
HTTP server user authentication, is used.
HTTP server user authentication, is used.
•
local—Local user database, as defined on the Cisco router or access
server, is used.
server, is used.
Step 3
end
Returns to privileged EXEC mode.
Step 4
show running-config
Verifies your entries.