Cisco Cisco IDS 4215 Sensor Guida Informativa

Pagina di 3
 
 
Product End-of-Life Notice 
 
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. 
Page 1 of 3 
 
End-of-Sale and End-of-Life Announcement for the Cisco 
IDS 4215 Sensor 
EOL6235, Amended 
Cisco
®
 announces the end-of-sale and end-of life dates for the Cisco IDS 4215 Sensor. The last 
day to order the affected product(s) is July 29, 2008. Customers with active service contracts will 
continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 
1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the 
affected product(s). Table 2 lists the product part numbers affected by this announcement. For 
customers with active and paid service and support contracts, support will be available until the 
termination date of the contract, even if this date exceeds the Last Date of Support shown in 
Table 1. 
Customers with the Cisco IDS 4215 Sensor are encouraged to migrate to the Cisco ASA 5510 
Adaptive Security Appliance Intrusion Prevention System (IPS) solution with Advanced Inspection 
and Prevention Security Services Module AIP-SSM-10. The Cisco ASA 5510 IPS solution with AIP-
SSM-10 provides a higher IPS throughput of up to 150 Mbps plus industry-leading firewall 
protection. Customers requiring promiscuous mode (non-inline) deployments are encouraged to 
migrate to the Cisco IPS 4240 Sensor, which supports up to 250 Mbps of IPS throughput. 
Customers needing higher-performance, inline solutions can consider the IPS 4240 or the ASA 
5510 IPS solution with AIP-SSM-20, which provides performance matched firewall and IPS 
throughput of up to 300 Mbps in a single integrated appliance. 
Table 1. 
End-of-Life Milestones and Dates for the Cisco IDS 4215 Sensor 
Milestone 
Definition 
Date 
End-of-Life Announcement 
Date 
The date the document that announces the end of sale and end of life 
of a product is distributed to the general public. 
January 29, 2008 
End-of-Sale Date 
The last date to order the product through Cisco point-of-sale 
mechanisms. The product is no longer for sale after this date. 
July 29, 2008 
Last Ship Date: HW 
The last-possible ship date that can be requested of Cisco and/or its 
contract manufacturers. Actual ship date is dependent on lead time. 
October 27, 2008 
End of SW Maintenance 
Releases Date: HW 
The last date that Cisco Engineering may release any final software 
maintenance releases or bug fixes. After this date, Cisco Engineering 
will no longer develop, repair, maintain, or test the product software. 
July 29, 2009 
End of Routine Failure 
Analysis Date: HW 
The last-possible date a routine failure analysis may be performed to 
determine the cause of product failure or defect. 
July 29, 2009 
End of New Service 
Attachment Date: HW 
For equipment and software that is not covered by a service-and-
support contract, this is the last date to order a new service-and-
support contract or add the equipment and/or software to an existing 
service-and-support contract. 
July 29, 2009 
End of Signature Update 
and Support 
The last date to receive new signature updates and signature support 
for the product. After this date, new signature updates are unavailable. 
July 29, 2011 
 
End of Service Contract 
Renewal Date: HW 
The last date to extend or renew a service contract for the product.  
October 24, 2012 
Last Date of Support: HW 
The last date to receive service and support for the product. After this 
date, all support services for the product are unavailable, and the 
product becomes obsolete. 
July 28, 2013 
HW = Hardware 
OS SW = Operating System Software