Cisco Cisco IPS 4255 Sensor
49
Release Notes for Cisco Intrusion Prevention System 7.2(2)E4
OL-27710-01
Logging In to the IDM
! ------------------------------
service anomaly-detection ad0
exit
! ------------------------------
service external-product-interface
exit
! ------------------------------
service health-monitor
exit
! ------------------------------
service global-correlation
exit
! ------------------------------
service aaa
exit
! ------------------------------
service analysis-engine
virtual-sensor vs0
logical-interface pair-ed subinterface-number 0
exit
exit
sensor#
Note
You can also use the more current-config command to view your configuration.
Step 3
Display the self-signed X.509 certificate (needed by TLS).
sensor# show tls fingerprint
SHA1: 64:9B:AC:DE:21:62:0C:D3:57:2E:9B:E5:3D:04:8F:A7:FD:CD:6F:27
Step 4
Write down the certificate fingerprints. You need the fingerprints to check the authenticity of the
certificate when connecting to this sensor with a web browser.
certificate when connecting to this sensor with a web browser.
Logging In to the IDM
The IDM is a web-based, Java Web Start application that enables you to configure and manage your
sensor. The web server for the IDM resides on the sensor. You can access it through Internet Explorer or
Firefox web browsers.
sensor. The web server for the IDM resides on the sensor. You can access it through Internet Explorer or
Firefox web browsers.
Note
The IDM is already installed on the sensor.
To log in to the IDM, follow these steps:
Step 1
Open a web browser and enter the sensor IP address. A Security Alert dialog box appears.
https://
sensor_ip_address