Cisco Cisco IPS 4520 Sensor Libro bianco
31
Firewall
August 2012 Series
31
Step 13:
Select
Monitored
, and then click
Apply
.
Next, you will edit the default route to the primary Internet CPE’s address.
Step 14:
Navigate to
Configuration > Device Setup > Routing > Static
Routes.
Step 15:
Select the default route created in Step 20, and click
Edit
.
Step 16:
In the Edit Static Route dialog box, in the
Options
pane, select
Tracked
.
Step 17:
In the
Track ID
box, enter
1
.
Step 18:
In the
Track IP Address
box, enter an IP address in the ISP’s
cloud. (Example: 172.18.1.1)
Step 19:
In the
SLA ID
box, enter
16
.
Step 20:
In the
Target Interface
list, select the primary Internet connection
interface, and then click
OK
. (Example: outside-16)
Step 21:
On the Information dialog box, click
OK
.
Next, you will create the secondary default route to the resilient Internet
CPE’s address.
CPE’s address.
Step 22:
In
Configuration > Device Setup > Routing > Static Routes
, click
Add
.
Step 23:
In the Add Static Route dialog box, in the
Interface
list, select
the resilient Internet connection interface created in Step 6. (Example:
outside-17)
outside-17)
Step 24:
In the
Network
box, enter
0.0.0.0/0.0.0.0
.
Step 25:
In the
Gateway IP
box, enter the primary Internet CPE’s IP
address. (Example: 172.17.130.126)