Cisco Cisco ASA for Nexus 1000V Series Switch Manuale Tecnico
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Advanced Protocol Handling
Configuration Scenarios
Scenario 1: FTP Client configured for Active Mode
Scenario 2: FTP Client configured for Passive Mode.
Scenario 3: FTP Client configured for Active Mode
Scenario 4: FTP Client running Passive Mode
Configure Basic FTP Application Inspection
Configure FTP Protocol Inspection on Non-Standard TCP Port
Verify
TFTP
Configure Basic TFTP Application Inspection
Verify
Related Cisco Support Community Discussions
Introduction
This document describes different FTP and TFTP inspection scenarios on the Adaptive Security
Appliance (ASA) and it also covers ASA FTP/TFTP inspection configuration and basic
troubleshooting.
Appliance (ASA) and it also covers ASA FTP/TFTP inspection configuration and basic
troubleshooting.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Basic communication between required interfaces
●
Configuration of the FTP server located in the DMZ network
●
Components Used
The information in this document is based on these software and hardware versions:
ASA 5500 or ASA 5500-X Series Adaptive Security Appliance that runs the 9.1(5) software
image
image
●
Any FTP Server
●
Any FTP Client
●
The information in this document was created from the devices in a specific lab environment. All of