Cisco Cisco 5760 Wireless LAN Controller Riferimenti tecnici
ap dot11 media-stream multicast-direct
To configure multicast-direct for 2.4-GHz/5-GHz band, use the ap dot11 media-stream multicast-direct
command.
command.
ap dot11 {24ghz| 5ghz} media-stream {multicast-direct {admission-besteffort| client-maximum value|
radio-maximum value}| video-redirect}
radio-maximum value}| video-redirect}
Syntax Description
Configure media-stream for 802.11 band.
media-stream
Configure multicast-direct for 802.11 band
multicast-direct
Admits media stream to best-effort queue.
admission-besteffort
Specifies the maximum number of streams allowed on a client.
client-maximum value
Specifies the maximum number of streams allowed on a 2.4-GHz
or a 5-GHz band.
or a 5-GHz band.
radio-maximum value
Redirect non Multicast-direct video to BestEffort queue over the
air.
air.
video-redirect
Command Default
None.
Command Modes
config
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
Before you configure the media stream multicast-direct parameters on a 802.11 network, ensure that the
network is nonoperational.
network is nonoperational.
Examples
This example shows how to configure multicast-direct for the 2.4-GHz band.
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
ap dot11 24ghz media-stream multicast-direct admission-besteffort
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
295
ap dot11 media-stream multicast-direct