Cisco Cisco 5760 Wireless LAN Controller Riferimenti tecnici
snmp-server engineID
To configure a name for either the local or remote copy of SNMP, use the snmp-server engineID command
in global configuration mode.
in global configuration mode.
snmp-server engineID {local engineid-string | remote ip-address [udp-port port-number] engineid-string}
Syntax Description
Specifies a 24-character ID string with the name of the copy of SNMP. You
need not specify the entire 24-character engine ID if it has trailing zeros.
Specify only the portion of the engine ID up to the point where only zeros
remain in the value.
need not specify the entire 24-character engine ID if it has trailing zeros.
Specify only the portion of the engine ID up to the point where only zeros
remain in the value.
local engineid-string
Specifies the remote SNMP copy. Specify the ip-address of the device that
contains the remote copy of SNMP.
contains the remote copy of SNMP.
remote ip-address
(Optional) Specifies the User Datagram Protocol (UDP) port on the remote
device. The default is 162.
device. The default is 162.
udp-port port-number
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None
Examples
The following example configures a local engine ID of 123400000000000000000000:
Controller(config)#
snmp-server engineID local 1234
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
975
snmp-server engineID