Manualsbrain.com
  1. Manuali
  2. Marche
  3. Cisco
  4. Cisco 8540 Wireless Controller
  5. Guida Alla Risoluzione Dei Problemi

Cisco Cisco 8540 Wireless Controller Guida Alla Risoluzione Dei Problemi

Scarica
Pagina di 16
Multicast
Multicast support is enabled in the Cisco 8500 Controller, and its operation is comparable to that of the Cisco
5500 Series Controllers, but with these restrictions:
If all APs on the 8500 Controller are configured in Local mode, Multicast−Multicast will be the
default mode and all features are supported (for example, VideoStream). This scenario is identical to a
5500 Controller.
1. 
If the APs are configured as a mix of Local mode and FlexConnect mode:
If IPv6 is required on the FlexConnect APs:
Disable Global Multicast Mode and change to Multicast−Unicast mode.
a. 
IPv6/GARP will work on FlexConnect and Local mode APs, but Multicast data and
the VideoStream feature will be disabled.
b. 
♦ 
IPv6/GARP is not required on FlexConnect APs:
Change the mode to Multicast−Multicast and Enable Global Multicast Mode and
IGMP/MLD snooping.
a. 
IPv6, GARP, Multicast Data, and VideoStream are supported on local mode APs.
b. 
♦ 
2.