Cisco Cisco 5520 Wireless Controller Riferimenti tecnici
Step 4
Go to Security Tab and under Layer 2 sub tab, select 802.1x for Layer 2 Security. Disable MAC Filtering if it is not
required
required
Step 5
Go to AAA Servers sub tab and under the Security tab. Select the RADIUS servers as shown and click Apply.
For RADIUS server to show up in the drop down list for Server 1, you must have configured RADIUS servers
on the WLC. Configuring RADIUS server on WLC is not shown as part of this configuration.
on the WLC. Configuring RADIUS server on WLC is not shown as part of this configuration.
Note
Step 6
Go to Advanced sub tab and enable FlexConnect Local Switching. Enter the VLAN for local switching configured on the
switch. Click Apply.
switch. Click Apply.
15