Cisco Cisco 5520 Wireless Controller Guida Alla Progettazione
1-19
Book Title
OL-xxxxx-xx
Chapter 1 Cisco Adaptive wIPS Management Deployment Guide, Release 8.0
Cisco Adaptive wIPS Introduction
Note
The forensics capability of the wIPS system should be used sparingly and then disabled after the desired
information is captured. The reason for this recommendation is the intensive load it places on the Access
Point as well as the interruption in scheduled channel scanning this capability requires. A wIPS Access
Point cannot be simultaneously performing channel scanning at the same instance it is producing a
forensic file. While the forensic file is being dumped, channel scanning will be delayed for a maximum
of 5 seconds.
information is captured. The reason for this recommendation is the intensive load it places on the Access
Point as well as the interruption in scheduled channel scanning this capability requires. A wIPS Access
Point cannot be simultaneously performing channel scanning at the same instance it is producing a
forensic file. While the forensic file is being dumped, channel scanning will be delayed for a maximum
of 5 seconds.
Adaptive wIPS Configuration
Mobility Services Engine Setup
To setup the mobility services engine:
Step 1
Login:
Login with the following credentials: root/password
Step 2
Start the Setup Process:
Upon the initial boot up, the MSE will prompt the administrator to launch the setup script. Enter yes
to this prompt.
to this prompt.
Note
If the MSE does not prompt for setup, enter the following command:
/opt/mse/setup/setup.sh
Step 3
Configure Hostname and DNS Domain Name:
Step 4
Configure Ethernet Interface Parameters: