Cisco Cisco Email Security Appliance C380 Guida All'Installazione
8
To access and manage the appliance by Ethernet, use the
Management network port. The IPv4 address that has been
assigned to the Management port by the factory is
192.168.42.42.
Management network port. The IPv4 address that has been
assigned to the Management port by the factory is
192.168.42.42.
For serial access to the appliance's console port, use the RJ-45
to DB-9 Rollover cable provided in the accessory kit to connect
the computer to the console port on the appliance.
to DB-9 Rollover cable provided in the accessory kit to connect
the computer to the console port on the appliance.
The following illustration shows a model with Ethernet ports.
Fiber Optic ports are available with the following models of the
Cisco Web Security Appliance: C690-1G and C690-10G. Each
of these models have two Fiber Optic ports. These ports are
located above the Ethernet ports shown in the following
illustration. For the Fiber Optic models, the Ethernet ports are
not present. For details, see the Cisco x90 Series Content
Security Appliances Installation and Maintenance Guide
Fiber Optic ports are available with the following models of the
Cisco Web Security Appliance: C690-1G and C690-10G. Each
of these models have two Fiber Optic ports. These ports are
located above the Ethernet ports shown in the following
illustration. For the Fiber Optic models, the Ethernet ports are
not present. For details, see the Cisco x90 Series Content
Security Appliances Installation and Maintenance Guide
Item
Port
Description
1
Data 1
A Gigabit Ethernet customer data
interface.
interface.
2
Data 2
A Gigabit Ethernet customer data
interface.
interface.
3
Data 3
A Gigabit Ethernet customer data
interface.
interface.
4
Data 4
A Gigabit Ethernet customer data
interface.
interface.
5
Remote
Power Cycle
Power Cycle
The port that is used for Remote
Power Cycle (RPC).
Power Cycle (RPC).
6
Console
Console port that directly connects a
computer to the appliance.
computer to the appliance.