Cisco Cisco Email Security Appliance C190 Guida Utente
8-37
Cisco IronPort AsyncOS 7.5 for Email Advanced Configuration Guide
OL-25137-01
Chapter 8 Centralized Management
If there are two or more, as in our example, decide if those two will share any
settings with each other that are not shared with the cluster. In that case, you will
be creating one or more groups for them. Otherwise, you will make machine level
settings for each, and do not need to have extra groups.
settings with each other that are not shared with the cluster. In that case, you will
be creating one or more groups for them. Otherwise, you will make machine level
settings for each, and do not need to have extra groups.
In our case we want to run
clusterconfig
from the CLI on any of the machines
already in the cluster, and select ADDGROUP. We will do this twice, once for
Paris and once for Rome.
Paris and once for Rome.
Now you can begin using the GUI and CLI to build configuration settings for the
cluster and for ALL the groups, even if the groups have no machines in them yet.
You will only be able to create machine specific settings for machines after they
have joined the cluster.
cluster and for ALL the groups, even if the groups have no machines in them yet.
You will only be able to create machine specific settings for machines after they
have joined the cluster.
The best way to create your override or exceptional settings is to copy the settings
from the higher (e.g. cluster) level down to a lower (e.g. group) level.
from the higher (e.g. cluster) level down to a lower (e.g. group) level.
For example, after creating the cluster our
dnsconfig
settings initially looked like
this:
Configured at mode:
Cluster: Yes
Group Main_Group: No
Group Paris: No
Group Rome: No
Machine lab2.cable.nu: No
If we "Copy to Group" the DNS settings, it will look like this:
Configured at mode:
Cluster: Yes
Group Main_Group: No
Group Paris: Yes
Group Rome: No
Machine lab2.cable.nu: No