Cisco Cisco TelePresence MX700 Guida All'Installazione
Provisioning set-up
(When using a provisioning system)
If in doubt for any of the parameters below, contact your
provisioning system provider.
See the administrator guide for your product, to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to the
Configuration
tab, and click
System Configuration
.
2. Open the
Provisioning
settings from the left column.
3. Select a provisioning infrastructure from the
Mode
drop
down list:
• TMS – Cisco TelePresence Management System
• VCS – Cisco Video Communication Server (only avail-
• VCS – Cisco Video Communication Server (only avail-
able for EX Series and MX Series)
• Callway –WebEx Telepresence
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying
VCS, then TMS and finally CUCM.
If you select
Off
, all configurations must be set manually on
the video system.
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. It may be required to authenticate the video system with
Cisco TMS. If so, enter
LoginName
and
Password
in the
respective input fields.
2. Enter the IP address or DNS name of the Cisco TMS server in
the
Address
input field under the
ExtermalManager
heading.*
3. Enter the
Path
to the provisioning service in the corre-
sponding input field
.
VCS (for EX Series and MX Series only)
1. It may be required to authenticate the video system with
the Cisco VCS. If so, enter
LoginName
and
Password
in
the respective input fields.
2. Enter the IP address or DNS name of the Cisco VCS in the
Address
input field under the
ExtermalManager
heading.
3. Enter the SIP
Domain
for the Cisco VCS in the corre-
sponding input field
.
Have a look at the
appendix for more information about VCS
provisioning.
WebEx Telepresence (formerly Callway)
Upon ordering the Cisco WebEx Telepresence service, you
have received a
Video number
and an
Activation code
.
If you do not have a video phone number and an activation code,
contact your company's WebEx Telepresence administrator.
1. Enter the Video number in the
LoginName
input field
.
2. Enter the Activation code in the
Password
input field
.
CUCM
1. Enter the IP address or DNS name of the UCM provisioning
server in the
Address
input field under the
ExtermalManager
heading.*
You can find more details about setting up Cisco UCM provi-
sioning in the
guide.
*
The DHCP server can be set up to provide the External Manager
address automatically (Option 242 for TMS; Option 150 for UCM). Any
input set up here overrides the setting provided by DHCP.
Back to task overview
If you are changing a value setting,
you have to always click
save
to confirm the change.
Cisco TelePresence Video Systems
D14639.10 Video Systems Getting Started Guide TC6.2, July 2013.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
24
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Confirguration