Cisco Cisco TelePresence MX700 Guida All'Installazione

Back to task overview

Provisioning set-up

(when using a provisioning system)

if in doubt for any of the parameters below, contact your  

provisioning system provider.

See the administrator guide for your product to find more  

information about the provisioning settings.

Select provisioning infrastructure

1. Go to 

and select a provi-

sioning infrastructure:

•  tMS – Cisco telePresence Management System
•  Callway – Webex telepresence
•  CuCM – Cisco unified Communications Manager
•  Auto - the system starts provisioning by first trying VCS, 

then tMS and finally CuCM.

if you select 

, all configurations must be set manually on 

the video system.

Set the required provisioning parameters

Which parameters to set depend on which infrastructure was selected.

TMS

1. Go to 

2. enter the iP address or dNS name of the Cisco tMS server 

in the 

input field.*

3. enter the

 to the provisioning service in the corre-

sponding input field

.

4. it may be required to authenticate the video system 

with Cisco tMS. if so, go back to 

and enter 

 and 

 in the respective input fields.

Webex Telepresence (formerly Callway)

upon ordering the Cisco Webex telepresence service, you 

have received a 

 and an 

.

Please contact your company's Webex telepresence admin-

istrator if you do not have a video phone number and an 

activation code.

1. Go to 

2. enter the Video number in the 

 input field

.

3. enter the Activation code in the 

 input field

.

CUCM

1. Go to 

2. enter the iP address or dNS name of the uCM provision-

ing server in the 

 input field.*

You can find more details about setting up Cisco uCM provi-

sioning in the Administering TC endpoints on CUCM guide. 

NoTe:

 if you wish to use Secure Mode for CuCM provision-

ing, you must use the web interface.

Always save the new value when you change a setting

•  drop down list selection: Navigate to the correct value 

and press the 

( )

 key to save, or press the left arrow 

key   to leave without saving.

•  text entry in an input field: enter the text, navigate to 

 to save the change, or navigate to 

 to leave 

without saving; then press the 

 

( ) key 

to confirm.

*

 the dHCP server can be set up to provide the external Manager address 

automatically (option 242 for tMS; option 150 for uCM). Any input in the 

input field overrides the setting provided by dHCP.

 

Cisco TelePresence Video Systems

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013. 

Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. 

18

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Confirguration