Cisco Cisco TelePresence MX700 Guida All'Installazione
Configuration using the web
interface
You have to use the touch controller or remote control for
the configurations until you know your system's iP address.
Finding the IP address
tap
Settings > System Information
on your touch controller;
or navigate to
Home > Settings > System information
if you
use the remote control and on-screen menu.
in both cases you can find the iPv4 Address and/or iPv6
Address of the system in the
Network
section.
Signing in to the web interface
1. open a web browser and enter the system’s iP address
in the address bar.
2. enter your user name and password and click
Sign In
.
the default user name is
admin
with no password set.
if you are not able to connect to the system:
• Make sure the system and computer are connected to
the same network.
• Make sure the system is switched on.
if the system has just been switched on, wait a few minutes
to allow the system to start up.
The web interface
Back to task overview
Cisco TelePresence Video Systems
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
23
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Confirguration