Cisco Cisco TelePresence MX700 Nota Di Rilascio
Known limitations
Cisco TelePresence System C/EX/SX/MX Series Software Release Notes
Page 54 of 194
Known limitations
Cisco
Reference ID
Equipment
Summary
CSCud33527
Cisco TelePresence Touch 8 When switching/replacing a Touch panel on an MX or
EX series system, the main unit needs to be restarted
for the new Touch panel to pair. Factory resetting the
Touch panel does not help.
for the new Touch panel to pair. Factory resetting the
Touch panel does not help.
CSCts86782
EX90
Touch panel may not come up when upgrading from
TC3.1.x to TC5.x on EX90. Solution: Upgrade to TC4.x,
then upgrade to TC5.x
TC3.1.x to TC5.x on EX90. Solution: Upgrade to TC4.x,
then upgrade to TC5.x
CSCtw52376
C20, C40, C60, C90
The Cisco VCS Provisioning (TMS Agent) wizard is
available from the CT Touch 8 for the C20, C40, C60,
C90 and all other systems with such a codec inside, yet
only the Cisco CTS EX 60/90 and Cisco CTS MX
200/300 is supported.
available from the CT Touch 8 for the C20, C40, C60,
C90 and all other systems with such a codec inside, yet
only the Cisco CTS EX 60/90 and Cisco CTS MX
200/300 is supported.
CSCtu98598
C20
If the local microphone mute icon does not appear on
the screen, issue the API command: xConfiguration
SystemUnit Type: shared.
the screen, issue the API command: xConfiguration
SystemUnit Type: shared.
CSCtu99526
Any
There is a HW incompatibility between the C-Series
systems and some NEC monitors. So far this is seen
with:
NEC LCD4020
NEC P401
This incompatibility will cause the monitor to wake up
from sleep mode even if the codec is still in sleep. This
happens when the monitor is connected using HDMI to
HDMI. A workaround is to use the DVI input of the
monitors.
systems and some NEC monitors. So far this is seen
with:
NEC LCD4020
NEC P401
This incompatibility will cause the monitor to wake up
from sleep mode even if the codec is still in sleep. This
happens when the monitor is connected using HDMI to
HDMI. A workaround is to use the DVI input of the
monitors.
CSCtw60572
TC3-TC4.1.2
The increased call log list introduced in TC4.2 will
cause systems with Cisco TelePresence Touch 8 to go
into constant reboot if downgraded to TC4.1 or less, in
the event that the call log is larger than what is
expected in TC4.1.
Workaround:
* Clear the call history before you downgrade.
* Factory default the system after downgrade if
it goes into constant reboot.
cause systems with Cisco TelePresence Touch 8 to go
into constant reboot if downgraded to TC4.1 or less, in
the event that the call log is larger than what is
expected in TC4.1.
Workaround:
* Clear the call history before you downgrade.
* Factory default the system after downgrade if
it goes into constant reboot.
NA
TC5.x
CTS-MAN autodetection of endpoints:
Autodetection requires CTI monitoring to be enabled in
the device information on CUCM. This is available in:
UCM 8.6(1) Device Pack shipping in December
UCM 8.6(2) which is not qualified for CTS-MAN 1.8
Workaround: Manually add endpoints to CTS-MAN.
Autodetection requires CTI monitoring to be enabled in
the device information on CUCM. This is available in:
UCM 8.6(1) Device Pack shipping in December
UCM 8.6(2) which is not qualified for CTS-MAN 1.8
Workaround: Manually add endpoints to CTS-MAN.
CSCts99218
CTMS 1.8.0
Initial release of CTMS 1.8.0 supports 720p only with all
endpoints running TC5.0 or later.
endpoints running TC5.0 or later.
CSCtr32420
Any
The C-series codecs and units with such a codec inside
it do not meet the Cisco password policy. It is highly
recommended to set a password on the unit during
install using the API command: ‘systemtools passwd’.
it do not meet the Cisco password policy. It is highly
recommended to set a password on the unit during
install using the API command: ‘systemtools passwd’.
CSCtr32331
C20
A C20 participating in a MultiSite will not be able to
send the following video formats in its main video
send the following video formats in its main video