Cisco Cisco TelePresence MX700 Dépliant
Manual registration of the endpoint
Configuring shared lines
Optional: To configure the CUCM for shared lines, navigate
back to
and repeat the steps for manual registration of another
endpoint and assign the next endpoint to the same directory
number.
Associated Devices: When one directory number has been
set up to be shared between more than one endpoint you
will see the MAC addresses of the devices listed in the
Associated Devices section.
Display the name of the caller
Optional: Navigate to the Line # on Device <MAC address>
section.
Display (Caller ID): Enter the name of the owner of the
TelePresence system to allow the receiver of a call from
the system to see the proper identity of the caller.
Display text for a line appearance is inteded for displaying
text such as a name instead of a directory number for
calls. If you specify a number, the person receiving a call
may not see the proper identity og the caller.
When done click
Save and Apply Config.
Navigate to the
Association Information section.
Navigate to: Device > Phone > Phone Configuration (continued from the previous page).
Navigate to the
Directory Number Information section.
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.06 Administering TC6.3 Endpoints on CUCM 9.1.2, OCTOBER 2013.
www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
28
Mandatory Optional
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
CUCM configuration