Cisco Cisco TelePresence MX700 Dépliant
Finding the MAC address of the endpoint
The MAC (Media Access Control) address can be found:
• On the System Information page (using the web interface,
Touch controller or remote control).
• By running an API command using a command line
interface.
• On the rating label of the TelePresence endpoint.
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.06 Administering TC6.3 Endpoints on CUCM 9.1.2, OCTOBER 2013.
www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
46
Finding the MAC address on the System
Information page
Using the web interface
To find the system’s MAC address, navigate to Home >
To find the system’s MAC address, navigate to Home >
System Information and see the General section.
Using the Touch controller
To find the system’s MAC address tap (Settings) > System
To find the system’s MAC address tap (Settings) > System
Information on the Touch and see the Hardware section.
Using the remote control
To find the system’s MAC address, navigate to Home >
To find the system’s MAC address, navigate to Home >
Settings > System Information and see the Hardware section.
Finding the MAC address using a command line
interface
To find the system’s MAC address:
1. Open a command line interface (e.g. PuTTY) and log in to
the endpoint (codec)
2. Run the following API command:
xStatus Network 1 Ethernet MacAddress
Finding the MAC address on the rating label
The rating label is found on the physical unit.
If the product is already mounted (wall/rack) it will be more
convenient to use one of the other methods described on this
page to find the MAC address.
The rating label is found underneath the codec:
• Cisco TelePresence Quick Set C20
• Cisco TelePresence Codec C40
• Cisco TelePresence Codec C60
• Cisco TelePresence Codec C90
• Cisco TelePresence SX20 Quick Set
• Cisco TelePresence Codec C40
• Cisco TelePresence Codec C60
• Cisco TelePresence Codec C90
• Cisco TelePresence SX20 Quick Set
The rating label is found on the rear side of the unit:
• Cisco TelePresence System EX60
• Cisco TelePresence System EX90
• Cisco TelePresence System EX90
The rating label is found on the rear side, behind the back cover:
• Cisco TelePresence MX200
• Cisco TelePresence MX300
• Cisco TelePresence MX300
If you have a Cisco Telepresence Profile Series, please use
one of the other methods described on this page to find the
MAC address, as the codec is mounted inside the column of
the unit.
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
Appendices